S2K Commerce - Products Dropdown - Canada
Actions
S2K Commerce - Order Entry
Actions
The Meridian Ultra Care Xtra Bariatric APM System is a combination mattress system for patients up to 362.87 kg. It provides both alternating pressure and low air loss with a cell-on-cell mattress design for optimum performance and comfort.
- Includes mattress, cover and pump
- Cell-on-cell design prevents the patient from "bottoming out" in power outage
- Quick disconnect cells for easy cell replacement
- 10" air cells made with nylon/polyurethane for increased durability and reliability
- CPR quick deflate located at the head of the mattress
- Quilted cover is low shear/low friction and made of moisture resistant, vapor permeable nylon
- Digital pump is high-flow, high-efficiency in an easy-to-use design
- Dual compressor for increased patient comfort and weight capacity
- 10-, 15- or 20-minute cycle times
- Two modes of therapy - static or alternating
- Five comfort settings for easy pressure adjustment
- Automatic reset from static to alternating after 45 minutes
- Adjustable pressure range from 20 mmHg to 50 mmHg
- Weight capacity: 362.87 kg
- Dimensions: 80" x 42" x 10"
- HCPCS Code: E0277
- Two-year warranty on mattress and pump
Item#:
4840-42
You must be logged in to order this item.
Log in here
The
Meridian Medical Aruba Contour Group 1 Foam Mattress offers a
therapeutically designed foam core that was created with
state-of-the-art technology to provide superior pressure relief and
comfort in three distinct areas: head and shoulders, torso and lower
extremities. Relief of pressure in these areas help to prevent
capillary occlusion, shear, skin abrasion and moisture build up; all of
which can cause skin breakdown. The computerized fabrication process
offers a sculptured surface to maximize airflow for each section of the
body for comfort, providing therapeutic support and pressure relief that
is far superior to a conventional innerspring mattresses.
The deluxe stretch nylon cover is durable, waterproof, anti-microbial and washable. It also features a waterfall zipper to prevent any fluids from reaching the foam mattress core. The bottom is constructed with a reinforced tri-laminate vinyl and non-slip protection for added safety.
The deluxe stretch nylon cover is durable, waterproof, anti-microbial and washable. It also features a waterfall zipper to prevent any fluids from reaching the foam mattress core. The bottom is constructed with a reinforced tri-laminate vinyl and non-slip protection for added safety.
- Mattress:
- Single layer foam core
- Pressure relief and comfort in three distinct areas: head and shoulders, torso and lower extremities.
- Sculptured surface to maximize airflow
- Support and pressure relief that is far superior to conventional innerspring mattresses.
- Deluxe Stretch Nylon Cover
- Durable
- Waterfall Zipper
- Waterproof
- Anti-microbial
- Washable
- Urethane laminate to reduce friction, shear & contamination
- Bottom is reinforced tri-laminate vinyl with non-slip protection
- Compressed, rolled and boxed for cost-efficient shipping and delivery
- Weight Capacity: 350 lbs.
- Meets California Flame Retardancy Standards TB# 117, 129 and 603 and Federal Standard 16 CFR 1633.
- Warranty: Two years on foam core/one year cover
Item#:
ARUBA-200
You must be logged in to order this item.
Log in here
The Vinyl Bed Rail Pads provide additional safety by protecting patients against bumps, bruises and other trauma from bed rail contact. They add necessary cushioning to bed rails, securing easily with hook and loop straps.
- Adds cushioning and protects against injuries from bed rail contact
- Pads are latex-free and fold easily for storage
- Do not interfere with operation of the bed rails
- Hook and loop straps secure pads in place
- Vinyl cover wipes clean for easy disinfecting
- Size: Half Length - 31" x 16" x 1"
- Quantity: 2/set
WARNING: This product can expose you to chemicals including Diethylhexyl phthalate (DEHP), which is known to the State of California to cause cancer or birth defects or other reproductive harm. For more information, visit www.P65Warnings.ca.gov .
Item#:
BR50
You must be logged in to order this item.
Log in here
The Meridian Medical Fall Mat helps reduce the possibility of injuries related to accidental patient falls from their bed. The PVC Fall Mat offers a ¾” low profile design with tapered edge that lessens the likelihood of a patient tripping on the perimeter. Please note that impact reduction will vary based on the floor surface on which the mat is placed, the weight of the patient and other possible factors.
Features and Benefits:
Features and Benefits:
- PVC Material offers tear resistance, durability and is easy to clean and disinfect
- Non-skid bottom helps keep the mat safely in place
- Anti-fatigue properties provide additional comfort for caregivers
- For use when the patient is in the bed
- Ships in brown box - 20.9" X 8.7" X 8.7"
- 12 Month Limited Warranty
Please note that subject to the floor surface and ambient room temperature, the mat may may take longer than 24 hours to fully flatten. Initial creasing of the product will lessen over the product lifetime.
Item#:
FM7220
You must be logged in to order this item.
Log in here
The Meridian SatinAir Adjustable Alternating Pressure Pump and Pad System is designed to be placed over an existing mattress and is both easy to use and maintain. The compact, quiet pump alternately inflates and deflates air cells in the pressure pad and comes standard with a variable pressure setting for maximum patient comfort and compliance. The pump features an output of five liters per minute with a five minute cycle time, and can be mounted on the bed with built-in brackets.
FEATURES:- 5 liter-per-minute pump alternately inflates and deflates air cells over a 5 minute cycle time
- Variable pressure setting for added patient comfort
- Pump can be mounted on the bed with built-in bracket
- Pad includes flaps that wrap around mattress for better stability
- Does not contain latex
- Support patients up to 300 lbs.
- One-year limited warranty on pump, 90-days limited warranty on pad
- HCPCS Code: E0181 pump
- HCPCS Code:A4640 replacement pad
- Durable, heavy gauge, premium vinyl
- 130 individual bubble cells for maximum comfort and effectiveness
- Head and foot flaps secure pad to mattress and minimize movement
- 5 liter-per-minute pump alternately inflates and deflates air cells over a 5 minute cycle time
- Variable pressure setting for maximum comfort
Item#:
MER-APP2
You must be logged in to order this item.
Log in here
The Meridian SatinAir is a combination therapy mattress system that provides both alternating pressure and low air loss to optimize pressure redistribution and manage skin maceration. The pump offers a static feature as well as adjustable comfort settings by patient weight. The nylon zipper cover is low shear, fluid-resistant and vapor permeable. CPR valve allows for quick deflation. The Meridian SatinAir is an innovative design ideal for use in nursing homes, hospitals and the home care environment.
- Includes mattress, cover and pump
- Pillow function maintains the air in cells at the head for patient comfort
- Air cells can be easily removed and replaced
- CPR quick deflate at head of mattress
- Quilted nylon zipper cover is low shear, fluid-resistant, and vapor permeable
- 8 liter-per-minute pump in an easy-to-use design
- Two modes of therapy - static or alternating
- Variable pressure setting for maximum comfort
- Support patients up to 350 lbs.
- One year warranty on mattress and pump
- HCPCS Code: E0277
- Seventeen rows of 8"alternating pressure air cells, 9 with laser holes.
- Air cells made of nylon/pvc and can be easily cleaned, removed and replaced
- Zipper cover is quilted vapor permeable nylon
- Water-resistant
- Easy cleaning
- Low shear/low friction
- CPR quick deflate at head of mattress
- 8 liter-per-minute pump
- Front panel switch provides two modes of therapy - static or alternating
- LED backlit switches with dial on panel for simple set up and operation
Item#:
MER-SAPM2
You must be logged in to order this item.
Log in here
The Meridian SatinAir + Base is a combination therapy mattress system that provides both alternating pressure and low air loss to optimize pressure redistribution and manage skin maceration. It incorporates a system of seventeen 5" individual air bladders over a 3" foam base for power outage protection. The pump offers a static feature as well as adjustable comfort settings by patient weight. The nylon zipper cover is low shear, fluid-resistant and vapor permeable. CPR valve allows for quick deflation. The Meridian SatinAir is an innovative design ideal for use in nursing homes, hospitals and the home care environment.
FEATURES- Includes mattress, cover and pump
- 3-inch foam base prevents "bottoming out" in the event of a power outage
- Pillow function maintains the air in cells at the head for patient comfort
- Air cells can be easily removed and replaced
- CPR quick deflate at head of mattress
- Quilted nylon zipper cover is low shear, fluid-resistant, and vapor permeable
- 8 liter-per-minute pump in an easy-to-use design
- Two modes of therapy - static or alternating
- Variable pressure setting for maximum comfort
- Support patients up to 350 lbs.
- One year warranty on mattress and pump
- HCPCS Code: E0277
- 3-inch high-density foam base provides support in the event of a power outage
- Seventeen rows of 5" alternating pressure air cells, 9 with laser holes
- Air cells made of nylon/pvc and can be easily cleaned, removed and replaced
- Zipper cover is quilted vapor permeable nylon
- Water-resistant
- Easy cleaning
- Low shear/low friction
- CPR quick deflate at head of mattress
- 8 liter-per-minute pump
- Front panel switch provides two modes of therapy - static or alternating
- LED backlit switches with dial on panel for simple set up and operation
Item#:
MER-SAPM53
You must be logged in to order this item.
Log in here
The ProBasics Reduced Gap Full-Length Bed Rail prevents fall out with less entrapment hazards. It fits all standard size beds and is included in some ProBasics bed packages.
- Durable welded steel construction with attractive brown vein finish
- Convenient self-adjusting, spring-loaded cross braces
- Four crossbars reduce entrapment hazards and keep patients safe
- Conveniently fits all standard size beds
- Overall length: 55"
- Overall height above deck: 13.5" raised - 4.5" lowered
- 2-year limited warranty
For added patient safety, purchase your ProBasics Reduced Gap Full-Length Bed Rail.
Item#:
PB6034
You must be logged in to order this item.
Log in here
The ProBasics Four Bar Clamp-On Half Rail is perfect for patients who will be getting in and out of bed by themselves, as they will be able to reach the release to drop the rails when exiting bed. It is also recommended for patients that don't move around in bed too much.
- No gap style reduces entrapment hazards and adds protection
- Easy to install; no tools required for installment
- Fits all woven and spring style hospital beds
- Durable and constructed of welded steel with brown vein finish
- Dimensions: 19"H x 37"L
Item#:
PB7035
You must be logged in to order this item.
Log in here
**CALL SALES FOR BED PACKAGE STOCK AVAILABILITY AT (800)-387-0896**
Designed for easy one person delivery and set-up with a foot section that weighs just 42 lb. The robust, lightweight frame and snap on/off low-voltage DC motor box/hi-low motor ensures quick, efficient set-ups and easy routine maintenance.
Clients can take comfort that in the event of a power failure a 9V battery back-up is there to position the bed springs and bed height for safe transfer. Full rail cross brace location indicators have been added to the spring deck to make positioning of ProBasics full bed rails simple and safe.
PRODUCT SPECIFICATIONS
SHIPPING SPECIFICATIONS
BED PACKAGE COMPONENTS - OPTIONS
*Total distributed weight capacity including user, mattress, bedding, and any other items on the bed surface. Please refer to the owner's manual for complete details.
**Please see owner's manual for complete warranty details.
Designed for easy one person delivery and set-up with a foot section that weighs just 42 lb. The robust, lightweight frame and snap on/off low-voltage DC motor box/hi-low motor ensures quick, efficient set-ups and easy routine maintenance.
Clients can take comfort that in the event of a power failure a 9V battery back-up is there to position the bed springs and bed height for safe transfer. Full rail cross brace location indicators have been added to the spring deck to make positioning of ProBasics full bed rails simple and safe.
- FEATURES
- Easy one person delivery & set-up--foot section weighs just 42 lb
- Quick & simple motor attachment or removal for service or cleaning
- Welded steel split frame construction
- Head and foot sections can be raised independently or simultaneously
- Large button, simple-to-use hand pendant
- Scratch-resistant bed ends keep the bed looking new
- Manual crank at the foot adjusts the frame height
- Scratch-resistant bed ends keep the bed looking new
- 9V battery back-up lets users go to the lowest bed position during power failures (battery not included)
- Headspring support and foot assembly are recessed to help reduce pinching and injuries
- Trendelenberg and reverse Trendelenberg position capable
- Beds include two locking and two non-locking casters
- Quiet, efficient ETL-approved DC low voltage single motor box
PRODUCT SPECIFICATIONS
| Bed Deck Height: | 12.75" minimum. (without casters) 21.5" maximum (with casters) |
| Sleep Surface: | 80"L x 36" W |
| Overall Bed: | 87"L x 36" W |
| Weight Capacity: | 450 lb* |
| Limited Warranty: | 5 Years on Frame** 2 Years on Motor - mechanical/electrical |
SHIPPING SPECIFICATIONS
| Component: | Carton Size: | Shipping Weight: |
| Foot/Head Springs Motor Box, and pendant | 45.5"x 10.5"x 37" | 107 lb |
| Head/Foot Bed Ends and Casters | 38"x 7.5"x 32.25" | 58 lb |
BED PACKAGE COMPONENTS - OPTIONS
| Bed Rails | |
|---|---|
| PB6034 | Full Bed Rails |
| PB7035 | Half Bed Rails |
| Mattress | |
| ARUBA-200 | ARUBA-200 Cross-cut Mattress |
*Total distributed weight capacity including user, mattress, bedding, and any other items on the bed surface. Please refer to the owner's manual for complete details.
**Please see owner's manual for complete warranty details.
Item#:
PBFEB
You must be logged in to order this item.
Log in here
**CALL SALES FOR BED PACKAGE STOCK AVAILABILITY AT (800)-387-0896**
Designed for easy one person delivery and set-up with a foot section that weighs just 42 lb. The robust, lightweight frame and snap on/off low-voltage DC motor box/hi-low motor ensures quick, efficient set-ups and easy routine maintenance.
Clients can take comfort that in the event of a power failure a 9V battery back-up is there to position the bed springs and bed height for safe transfer. Full rail cross brace location indicators have been added to the spring deck to make positioning of ProBasics full bed rails simple and safe.
PRODUCT SPECIFICATIONS
SHIPPING SPECIFICATIONS
BED PACKAGE COMPONENTS
*Total distributed weight capacity including user, mattress, bedding, and any other items on the bed surface. Please refer to the owner's manual for complete details.
**Please see owner's manual for complete warranty details.
Designed for easy one person delivery and set-up with a foot section that weighs just 42 lb. The robust, lightweight frame and snap on/off low-voltage DC motor box/hi-low motor ensures quick, efficient set-ups and easy routine maintenance.
Clients can take comfort that in the event of a power failure a 9V battery back-up is there to position the bed springs and bed height for safe transfer. Full rail cross brace location indicators have been added to the spring deck to make positioning of ProBasics full bed rails simple and safe.
- FEATURES
- Easy one person delivery & set-up--foot section weighs just 42 lb
- Quick & simple motor attachment or removal for service or cleaning
- Welded steel split frame construction
- Head and foot sections can be raised independently or simultaneously
- Large button, simple-to-use hand pendant
- Scratch-resistant bed ends keep the bed looking new
- Manual crank at the foot adjusts the frame height
- Scratch-resistant bed ends keep the bed looking new
- 9V battery back-up lets users go to the lowest bed position during power failures (battery not included)
- Headspring support and foot assembly are recessed to help reduce pinching and injuries
- Trendelenberg and reverse Trendelenberg position capable
- Beds include two locking and two non-locking casters
- Quiet, efficient ETL-approved DC low voltage single motor box
PRODUCT SPECIFICATIONS
| Bed Deck Height: | 12.75" minimum. (without casters) 21.5" maximum (with casters) |
| Sleep Surface: | 80"L x 36" W |
| Overall Bed: | 87"L x 36" W |
| Weight Capacity: | 450 lb* |
| Limited Warranty: | 5 Years on Frame** 2 Years on Motor - mechanical/electrical |
SHIPPING SPECIFICATIONS
| Component: | Carton Size: | Shipping Weight: |
| Foot/Head Springs Motor Box, and pendant | 45.5"x 10.5"x 37" | 107 lb |
| Head/Foot Bed Ends and Casters | 38"x 7.5"x 32.25" | 58 lb |
BED PACKAGE COMPONENTS
| Bed Rails | |
|---|---|
| PB6034 | Full Bed Rails |
*Total distributed weight capacity including user, mattress, bedding, and any other items on the bed surface. Please refer to the owner's manual for complete details.
**Please see owner's manual for complete warranty details.
Item#:
PBFEB-FR
You must be logged in to order this item.
Log in here
**CALL SALES FOR BED PACKAGE STOCK AVAILABILITY AT (800)-387-0896**
Designed for easy one person delivery and set-up with a foot section that weighs just 42 lb. The robust, lightweight frame and snap on/off low-voltage DC motor box/hi-low motor ensures quick, efficient set-ups and easy routine maintenance.
Clients can take comfort that in the event of a power failure a 9V battery back-up is there to position the bed springs and bed height for safe transfer. Full rail cross brace location indicators have been added to the spring deck to make positioning of ProBasics full bed rails simple and safe.
PRODUCT SPECIFICATIONS
SHIPPING SPECIFICATIONS
BED PACKAGE COMPONENTS
*Total distributed weight capacity including user, mattress, bedding, and any other items on the bed surface. Please refer to the owner's manual for complete details.
**Please see owner's manual for complete warranty details.
Designed for easy one person delivery and set-up with a foot section that weighs just 42 lb. The robust, lightweight frame and snap on/off low-voltage DC motor box/hi-low motor ensures quick, efficient set-ups and easy routine maintenance.
Clients can take comfort that in the event of a power failure a 9V battery back-up is there to position the bed springs and bed height for safe transfer. Full rail cross brace location indicators have been added to the spring deck to make positioning of ProBasics full bed rails simple and safe.
- FEATURES
- Easy one person delivery & set-up--foot section weighs just 42 lb
- Quick & simple motor attachment or removal for service or cleaning
- Welded steel split frame construction
- Head and foot sections can be raised independently or simultaneously
- Large button, simple-to-use hand pendant
- Scratch-resistant bed ends keep the bed looking new
- Manual crank at the foot adjusts the frame height
- Scratch-resistant bed ends keep the bed looking new
- 9V battery back-up lets users go to the lowest bed position during power failures (battery not included)
- Headspring support and foot assembly are recessed to help reduce pinching and injuries
- Trendelenberg and reverse Trendelenberg position capable
- Beds include two locking and two non-locking casters
- Quiet, efficient ETL-approved DC low voltage single motor box
PRODUCT SPECIFICATIONS
| Bed Deck Height: | 12.75" minimum. (without casters) 21.5" maximum (with casters) |
| Sleep Surface: | 80"L x 36" W |
| Overall Bed: | 87"L x 36" W |
| Weight Capacity: | 450 lb* |
| Limited Warranty: | 5 Years on Frame** 2 Years on Motor - mechanical/electrical |
SHIPPING SPECIFICATIONS
| Component: | Carton Size: | Shipping Weight: |
| Foot/Head Springs Motor Box, and pendant | 45.5"x 10.5"x 37" | 107 lb |
| Head/Foot Bed Ends and Casters | 38"x 7.5"x 32.25" | 58 lb |
BED PACKAGE COMPONENTS
| Bed Rails | |
|---|---|
| PB6034 | Full Bed Rails |
| Mattress | |
| ARUBA-200 | ARUBA-200 Cross-cut Mattress |
*Total distributed weight capacity including user, mattress, bedding, and any other items on the bed surface. Please refer to the owner's manual for complete details.
**Please see owner's manual for complete warranty details.
Item#:
PBFEB-FRARBPKG
You must be logged in to order this item.
Log in here